🎨 Paint Calculator
For walls only — ceiling is optional. Subtracts a standard door & windows allowance if you want it to.
Your result
Formula: wall area = 2 × (L+W) × H, minus 21 sq ft per door & 15 sq ft per window. 1 gallon ≈ 350 sq ft per coat.
Six free calculators that tell you exactly how much paint, flooring, tile, concrete, decking and drywall to buy — with waste built in, so you don't make a second trip or overbuy by a pallet.
For walls only — ceiling is optional. Subtracts a standard door & windows allowance if you want it to.
Formula: wall area = 2 × (L+W) × H, minus 21 sq ft per door & 15 sq ft per window. 1 gallon ≈ 350 sq ft per coat.
For laminate, vinyl plank, engineered wood and hardwood sold by the box.
Boxes = ceil( room area × (1 + waste) ÷ sq ft per box ). Buy from the same dye lot when you can.
Floors, showers and backsplashes. Counts tiles, boxes and a grout estimate.
Tiles = ceil( area × (1+waste) ÷ tile sq ft ). Grout is a rough guide — joint width changes it a lot.
Slabs, pads, footings and small pours. Gives you ready-mix yards and bag counts.
Volume = L × W × (thickness ÷ 12). 1 cubic yard = 27 cu ft. One 80 lb bag ≈ 0.6 cu ft set.
How many boards, how long, and roughly how many screws — before you get to the lumber yard.
*Assumes boards run across the width and you add 10% for cuts/waste. Joists at 16 in on-centre, 2 screws per joist crossing.
Sheets for walls (and ceiling if you tick it), plus screws and joint compound ballparks.
Wall area = perimeter × height. Add 10% for cuts, then divide by sheet size and round up.
The numbers every calculator above is built on — handy if you're estimating on paper at the store.
| Material | Typical coverage | Waste to add | Watch out for |
|---|---|---|---|
| Interior paint | 350 sq ft / gallon / coat | — (coats do the work) | Rough or unprimed drywall drinks paint — closer to 250 sq ft |
| Laminate / vinyl plank | 20–24 sq ft / box | 10% straight, 15% diagonal | Buy same dye lot; keep 1 spare box for repairs |
| Tile | Varies by tile size | 10% straight, 15–20% pattern | Large-format tile needs flatter floors & more thinset |
| Concrete (80 lb bag) | 0.6 cu ft per bag | 5–10% | Over ~1 cubic yard, ready-mix is usually cheaper & faster |
| Deck boards 5.5 in | ~5.75 in per row incl. ¼ in gap | 10% | Boards shrink as they dry — keep gaps consistent, 2 screws per joist |
| Drywall 4×8 | 32 sq ft / sheet | 10% | 8-ft sheets are far easier to move than 12-ft in a house |
Draw it, label every wall, note doors, windows, closets and bulkheads. Half of all under-buys come from one forgotten wall.
Calculators give you the math. The box gives you reality. If they disagree, trust the box coverage for that exact product.
Most big-box stores take unopened boxes back. One trip with a little extra beats a mid-job run with wet paint or open mortar.
They use standard industry coverage rates and round up to whole gallons, boxes and sheets — the same way a store associate would estimate. Your exact product's box coverage always wins if it differs.
You don't paint them. Subtracting ~21 sq ft per door and ~15 sq ft per window keeps you from buying a gallon you'll never open on smaller rooms.
Yes. Cuts at walls, mistakes, and a few damaged pieces are normal. For diagonal, herringbone or patterned layouts, go to 15–20%.
As a rule of thumb, past about 1 cubic yard (roughly 45 × 80 lb bags) ready-mix is cheaper, faster and more consistent — and your back will thank you.
That's exactly what it's built for. Results update as you type, and the project list pulls every material into one copy-and-go shopping list.